UNITRONICS V130-33-TA24 PLC HMI

Description

V130-33-TA24  with gasket and mounting brackets
This model comprises a total of 12 inputs. Input functionality can be adapted as follows 1. All 12 inputs may be used as digital inputs. They may be wired in a group via a single jumper as either npn or pnp. In addition, according to jumper settings and appropriate wiring: - Inputs 5 and 6 can function as either digital or analog inputs. - Input 0 can function as a high-speed counter, as part of a shaft-encoder, or as normal digital inputs. - Input 1 can function as either counter reset, normal digital input, or as part of a shaft-encoder. - Inputs 9 and 10 can function as either digital, thermocouple, or PT100 inputs; Input 11 can also serve as the CM signal for PT100.
Digital Outputs Number of outputs 10 pnp source Output type P-MOSFET (open drain) Isolation None Output current (resistive load) 0.5A maximum per output 3A maximum total for common
Analog Inputs Number of inputs 2,  Input type Multi-range inputs: 0-10V, 0-20mA, 4-20mA Input range 0-20mA, 4-20mA 0-10VDC
RTD Inputs Input range -200 to 600°C/-328 to 1100°F. 1 to 320A. Isolation None Conversion method Voltage to frequency Resolution 0.1°C/0.1°F
Thermocouple Inputs ; mv, B,E,J,K, N,R,S,T
Analog Outputs Number of outputs 2 Output range 0-10V, 4-20mA