New KEYENCE Programmable Logic Controller, Base Unit, Panel KV-N14DR

Description

Welcome To Fibica
Follow Daily Mart on:
New KEYENCE Programmable Logic Controller, Base Unit, Panel KV-N14DR
Product Description
Base Unit, Panel, DC Power Supply Input(8 Points)/Output(6 Points) Relay Outputs
Availability:
Customize
Usually Ships within 2-4days
Any Questions:
Chat with a Specialist >
Feel free to contact our specialist for any compatibiltiy problems.
Close Notes
Quantity:
1
Buy it Now
If you have any questions, please inform us by eBay message.
Close Notes
Product Specification:
Model
KV-N14DR
General specifications
Base Unit
Power voltage
24 VDC (+10%/-15%)
Output Power voltage
―
Current consumption
160mA
Operating ambient temperature
0 to +55°C (no freezing)*1*2
Ambient temperature for storage
-25 to +75°C
Operating ambient humidity
5 to 95% RH (no condensation)*3
Withstand voltage
1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case
Noise resistance
1500 V peak-to-peak or more, pulse width 1 µs, 50 ns (by noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6)
Vibration resistance
Intermittent vibration
Amplitude : 3.5 mm*4*5
Acceleration : 9.8 m/s2*4*5
Continuous vibration
Amplitude : 1.75 mm*4*5
Acceleration : 4.9 m/s2*4*5
Shock resistance
Acceleration : 150 m/s2 , application time : 11 ms, two times in each of the X, Y, and Z directions
Insulation resistance
50 MΩ or more
(500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case)
Operating environment
Minimal amount of dust and corrosive gas present
Usage environment
2000m or less
Overvoltage category
AC : II, DC : I
Pollution degree
2
Weight
Approx. 350 g
Performance specifications
Arithmetic control method
Stored program method
I/O control method
Refresh method
Programming language
Expanded ladder, KV Script, mnemonic
Number of instructions
Basic instructions : 81 kinds and 182 instructions, Application instructions : 39 kinds and 56 instructions
Calculation instructions : 123 kinds and 311 instructions, Expansion instructions : 92 kinds and 141 instructions,
Total : 335 kinds and 690 instructions
Instruction execution speed
Basic instruction
50 ns minimum
Application instruction
170 ns minimum
Program capacity
8,000 steps
Maximum number of attachable I/O units
3
Maximum number of inputs/outputs
128
Input relay
R
9600 points 1 bit (R000 to R59915)
Output relay
Internal auxiliary relay
Link relay
B
8192 points 1 bit (B0 to B1FFF)
Internal auxiliary relay
MR
9600 points 1 bit (MR000 to MR59915)
Latch relay
LR
3200 points 1 bit (LR000 to LR19915)
Control relay
CR
1440 points 1 bit (CR000 to CR8915)
Timer
T
512 points 32 bit (T0 to T511)
Counter
C
256 points 32 bit (C0 to C255)
Data memory
DM
32768 points 16 bit (DM0 to DM32767)
Link register
W
16384 points 16 bit (W0 to W3FFF)
Temporary memory
TM
512 points 16 bit (TM0 to TM511)
High-speed counter
CTH
2 points (CTH0 and CTH1)
32-bit automatic reset counter*6
(Input response : 100 kHz per single phase, 50 kHz per phase difference)*7
High-speedcounter comparator
CTC
4 points (CTC0 to CTC3)
32 bits, two points per high-speed counter
Index register
Z
12 points 32 bit (Z01 to Z12)
Control memory
CM
9000 points 16 bit (CM0 to CM8999)
Positioning pulse output
―
Base unit I/O
Input : 8 points, output : 6 points
Input common : 1 point
Output common : 4 points (R type)
1 point (T/TP type)
Number of comments and labels that can be stored in the main unit
Device comment
10000
When a maximum-length ladder programme is written with no labels.
Labels
14000
When a maximum-length ladder programme is written with no device comments.
Power off holding function
Program memory
Flash ROM can be rewritten 10000 times
Devices
Nonvolatile RAM*8
Self-diagnosis function
CPU error, RAM error, and other problems
Input specifications
Relay number
General input
R000 to R003
(4 points)
High-speed A-phase and B-phase input
R004 to R007
(2 channels,
4 points in total)
Input mode
24 VDC input (open collector)
Maximum input voltage
26.4 VDC
Rated input voltage
General input
24 VDC (5.3 mA*9)
High-speed A-phase and B-phase input
24 VDC (6.5 mA*9)
Minimum ON voltage
19 VDC
Maximum OFF voltage
1.5mA
Common method
General input
All inputs/common (1 terminal)
High-speed A-phase and B-phase input
Shared common for all inputs (shared with general-purpose input)
Circuit delay time
General input
OFF to ON : Max. 30 µs (Typ. 3.5 µs)
ON to OFF : Max. 50 µs (Typ. 15 µs)
* The values are as shown below for R108 to R203 of the KV-N60xx.
OFF to ON : Max. 50 µs (Typ. 7 µs)
ON to OFF : Max. 150 µs (Typ. 70 µs)*10
High-speed A-phase and B-phase input
OFF to ON : Max. 2 µs (Typ. 1.1 µs)
ON to OFF : Max. 2 µs (Typ. 0.3 µs)*10
Input time constant
Input time constant setting
Digital filter : 1.6 to 2 µs*10*11
Digital filter : 9 to 12 µs*10*11
Digital filter : 90 to 93 µs*10*11
Digital filter : 300 to 400 µs*10*11
Digital filter : 800 to 900 µs*10*11
Digital filter : 2.3 to 2.4 ms*10*11
Digital filter : 4.0 to 4.5 ms*10*11
Digital filter : 9 to 9.5 ms*10*11
Response frequency
High-speed A-phase and B-phase input
Single phase : 100 kHz, phase difference : 50 kHz, 24 V±10%, Duty 50%
Output specifications
Relay number
General input
R500 to R505
(6 points)
High-speed A-phase and B-phase input
―
Output mode
Relay
Rated load
General output
30 VDC, 0.5 A
High-speed output
―
Leakage current at OFF
Residual voltage at ON
Common method
General output
2 to 4 points/1 common
High-speed output
―
ON/OFF response time
General output
10ms or less
High-speed output
―
Overcurrent protection
Output frequency
High-speed output
ON resistance
50mΩ or less
Minimum applicableload
100µA/100mVDC
Relay life
Electrical : 100000 cycles or more (20 cycles/minute) Mechanical : 20000000 cycles or more
Relay replacement
Not possible
Built-In Serial Port
Interface
Communication standard
RS-232C
Connection
Modular connector
Transmission specifications
Baud rate
1200,2400,4800,9600,
19200,38400,57600,
115200bps
Transmission method
Full duplex
Data format
Start bit
1 bit
Data bits
7 bit, 8 bit
Stop bits
1 bit, 2 bit
Error detection
Parity
Even, odd, none
Transmission distance
15m
Number of transmission units
1
Display
SD (green), RD (red)
*1 This is the guaranteed range of the system (excluding the specially mentioned values of each unit and cassette).
*2 This is regulated according to the temperature 30 mm below the center of the control panel unit.
*3 The range guaranteed as a system (excluding items specially noted for the units and cassettes).
*4 These specifications correspond to situations in which the unit is mounted on a DIN rail and in which the unit is mounted on the panel directly.
*5 Conforms to JIS B 3502 and IEC61131-2. Number of scans : 10 times (100 minutes) in each of the X, Y, and Z directions
*6 You can also configure the settings so that automatic reset is not used.
*7 Only open collectors are supported. Line drivers are not supported.
*8 You can set the target device by clicking “CPU system setting” and then “Power off holding” in KV STUDIO.
*9 Reference value of input current.
*10 The input response time corresponding to the input time constant can be calculated as shown below. (Response time) = (Circuit delay of the input circuit) + (Delay by the digital filter)
Example : Maximum response time when the input time constant is set to 500 µs
OFF to ON : 30 µs (circuit delay) + 400 µs (digital filter) = 430 µs
ON to OFF : 50 µs (circuit delay) + 400 µs (digital filter) = 450 µs
*11 Normal : 10 ms, When the HSP instruction is used : 10 µs
When CR2305 is turned ON : 10 µs to 10 ms, eight-level switching is possible (set with CM1620) Can also be set from the Unit Editor.
Package Included:
1 x New KEYENCE Programmable Logic Controller, Base Unit, Panel KV-N14DR
6 months warranty
60 days money back
Life-time support
Our specialists will be with you during shopping and after-sell. Professional advise and any technical problem will be provided. We will respond any question within
24-hour
normally. Please allow longer time for weekend.
Our logistic team will pack your order safely, make sure the item will be arrived perfectly. And then the parcels will be pass to courier. The total dispatched time will be around
1-2 days
.
We focus on product quality, rather than packaging and marketing, in order to deliver the
finest quality
of product at a fraction cost. We believe that you would like to pay for the item cost except unnecessary costs.
Our product team will keep the products
up-to-date
, which can allows you to purchase the latest and valuable products from our stores. We believe our
Wide Product Range
will be your selection.
How should I make my payment ?
We accept
PayPal
. Your payment is protected by
Buyer Protection
.
Items will be shipped within
1-2 working days
of payment being made.
No mailing payment will be accepted.
How long is the delivery time ?
Total delivery time is split into two parts: Processing and Shipping
Processing time
It takes normally
1-3 business days**
. We will check your order, confirm your payment, verify your address and arrange your shipment during this period of time.
Shipping time
In general, the delivery time of each international courier is as below:
Economy Shipping:
�
10-21�business days
in normal.
EMS:
�
5-15�business days
in normal.
**Reminder: Our warehouse do not process orders durning weekend or any United States public holidays. Therefore, please allow another 1-2 business days to process your weekend orders.**
Do you ship to my country ?
Yes, we do. Actually, we ship to any countries all over the world (As long as your country is on the earth).
Do you provide tracking number ?
Sure thing. We will upload the tracking number once the item is dispatched. Here is how you can locate the tracking number:
Click
My eBay
at the top of most eBay pages. You may need to sign in.
Click the
Purchase History
link on the left side of the page.
You'll see the tracking number under the item title.
Other Shipping Policy
We don't responsible for any customs tax and similar fees.
All shipping charges are not negotiable.
Shipping and handling fee includes all packing, warehouse and distribution cost.
How many months warranty do you provide ?
3-24 months
warranty is provided to our products. The length of the warranty depends on the nature of the products.
What should I do if the item quality is bad / does not fit ?
Normally any quality problems, please return to exchange a brand new one within 60 days or purchase. We will pay for the return postage.Kindly contact our customer support for more details.
What should I do if the item is broken or dead on arrival ?
For ensuring all the items are in good quality, we will test all products before the packages were sent out. If there are any problems with the item, kindly send us some images of the situation. And we are more than willing to assist you any further.
What should I do if I choose to return the item for a full refund or replacement ?
Please contact our customer support team before returning the defective item. Return items should include the original packaging and all accessories. Please make sure the item have NO man-made sabotage., otherwise, refund/exchange request will be rejrcted. DO REMEMBER SIGN YOUR RMA# on the front of the package., or your return won't be accepted.
We will pay for the shipping cost of resending items as well.
Where can I find a RMA ?
RMA is Return Merchandise Authorization. Please contact our customer support and explain them your situation. They will try to solve the problem for you and issue you a RMA for returning the item back to us.