Crestron TSW-1050-TTK-W-S - Table Top Kit for TSW-1050/1052

Description

Used - Normal wear and tear - includes hardware, instructions and template cut-out
The TSW-1050-TTK provides a stylish and convenient tabletop enclosure for a
TSW-1050
ro
TSW-1052
Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface.
An optional swivel mount accessory (
TSW-550/750/1050-SMK
) is available separately, providing a means for permanently mounting the enclosure while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed. The swivel mount may be installed on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1 3/8 inch (35 mm) maximum.
Wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom for a very clean, cordless appearance. The rear wire opening can accommodate a single cable up to 1/4 inch (6 mm) diameter such as standard CAT5. The bottom opening measures 29/32 inch (23 mm) diameter, while the swivel mount
[1]
can accommodate wiring up to 11/16 inch (17 mm) diameter.
Key Features
Converts a TSW-1050 or TSW-1052 to a stylish 10.1" tabletop touch screen
Provides a 38° fixed operating angle
Allows permanent mounting using the optional swivel mount kit
[1]
Provides the choice of a rear or bottom wire exit