Beverage Air SPED72HC-08-2 72" Refrigerated Sandwich / Salad Prep With Drawers

Description

Please Contact Us With Any Questions/Concerns
* Picture is for reference only and may contain options or accessories that are not included. Please contact us to make sure all features you need are included!
*If you require Liftgate Delivery, please add for this service. There is a fee for Non-commercial Delivery as well.*
Welcome To Our Listing!
Beverage Air, SPED72HC-08-2, 72" Refrigerated Sandwich / Salad Prep Table W/ Drawers
Features and Benefits:
The Beverage Air SPED72HC-08-2 All around prep table features enhanced refrigeration system.  Improved airflow for less temperature gradient and uniform temperature distribution throughout the cabinet. Pans are cooled from the bottom, eliminating the necessity of air blanket.  Airflow assures that product in open containers is kept below 41°F and above freezing. This translates into increased product shelf life, higher quality food, better food appearance, fresher product and a reduction of bacteria build-up to combat food-borne illnesses.  Exterior construction includes heavy-duty stainless steel finish on front, sides, top, drawers and grille. Removable hoods and insulated lid assemblies are made of matching stainless steel. Cabinet back and bottom are constructed of galvanized steel. Interior liner is made of aluminum for superior resistance to corrosion.  In cabinets with doors and drawers, doors are mounted to face of cabinet on cartridge-style hinges permitting them to self close under their own weight. Hinges also allow doors to stay open 120° and permit easy door removal for service and cleaning if required. A plug-in type vinyl magnetic gasket is attached to each door for positive seal.  Drawer frames are constructed of heavy-duty stainless steel and are supported on heavy-duty telescoping drawer slides for maximum support of stored food products. Slides have locking mechanism to prevent from drawers being pulled off of cabinets. Upper pull-out drawers accommodate 4” deep pans. Lower pull-out drawers accommodate up to 6” deep pans. Heavy-duty pan divider supports are supplied. Food service pans for drawers are not included. Snap-type vinyl magnetic gasket is attached to each drawer for positive seal. Top drawer extends 17 3/4” (when opened) and bottom drawer extends 15 3/4” (when opened).  Cabinet insulation is CFC and HCFC-free foamed-in-place polyurethane of two-inch minimum thickness. Six-inch casters, 2 with brakes, are standard. Legs are available as an option.  Cutting board supplied with cabinet is 10” wide constructed of high-density white polyethylene plastic. It is readily removable for cleaning. Pans furnished for top are 4” deep and made of polycarbonate plastic.
The SPED72HC-08-2 More robust refrigeration system provides added capacity and efficiency. Systems are designed using CFC and HCFC-free R290 refrigerant. Recirculated, forced air from evaporator is moved under pans, which are recessed 2” from top of cabinet. Forced air over the condenser is drawn through grille under bottom drawer as well as the back and bottom of cabinet. Automatic condensate evaporator is provided to eliminate the need of floor drains.
Item Details
Length Overall:  72" / 1829 mm
Depth Overall:  29-1/4" / 743 mm
Height Overall:  41-11/16" / 1059 mm
Number Of Drawers:  2
Number Of Doors:  2
Top Drawer Extension (When Opened):  17-3/4"
Bottom Drawer Extension (When Opened):  15-3/4"
Net Capacity (cu. ft. / liters): 21.5 / 609
Internal Length:  68" / 1727 mm
Internal Depth:  19" / 483 mm
Internal Height:  23" / 584 mm
Number Of Pans:  8
Full Load Amperers 115/60/1:  9.6
Horsepower:  1/3
Warranty:  3 Years Parts & Labor & Additional 2 Years On Compressor
Please Contact Us for a copy of the Manufacturer's Spec Sheet or Warranty Info!
FREE SHIPPING to business addresses in contiguous U.S.!
Free Shipping DOES NOT include Lift Gate OR Non-Commercial Delivery Charges.
** Most warranties are not valid if used at a non-commercial address **
California Residents Only
WARNING: This product may contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov
Contact Us for details!
(See below for full details)
*** Ebay pricing IS NOT available in our store locations!
Payments:
Payment must be made within 5 days of the auction ending, or the item will be relisted.
We accept VISA, MasterCard, American Express, Discover and Paypal.
Shipping Info:
Shipping Method:
Freight
Fast Shipping:
Most orders will ship within 2-3 business days after payment has cleared.
Shipping to the contiguous 48 states only.
Sorry, No APO/FPO or PO Box Delivery
If you require Liftgate Delivery, please add for this service.
There is a fee for Non-commercial Delivery as well.
If you would like the freight company to
call you before delivery, please add an additional
Save Money!!
Buy multiple auctions and we will combine your shipping, which saves a great deal of money!
Smaller items that are able to ship UPS Ground are not applicable to Lift Gate or Residential Delivery Fees
It is your responsibility to inspect all shipments for damage BEFORE YOU SIGN for the shipment. If the item is damaged, you need to alert the shipping company immediately, and DO NOT SIGN for the item
.
THE BEST RULE OF THUMB WITH FREIGHT DAMAGE IS:
"IF IN DOUBT, REFUSE THE SHIPMENT!"
What is freight delivery?
Freight delivery is required when merchandise is too large or heavy to be delivered by UPS or USPS. These items are delivered to your locations via a tractor trailer. Standard Delivery does not include unloading the merchandise or delivering it inside of your location. You are responsible for offloading the merchandise and bringing your merchandise inside of your location. Please contact us if you require special handling.
What is a lift-gate?
A lift-gate is a device used to raise and lower items from ground level to the level of a tractor trailer. Freight companies deliver items on a tractor trailer which is 56 inches above the ground. These trailers are designed to load and unload at a loading dock or with a fork-lift. If your delivery location does not have a loading dock or fork-lift and the item is too heavy to remove from the trailer by hand, then you may need a lift-gate.
Do I need lift-gate delivery?
There are several ways to avoid paying lift-gate delivery costs. If your delivery location has a loading dock or forklift you do not need a lift-gate. If the individual items in your shipment are light enough for you and your friends to remove from the truck you do not need a lift-gate. If you are willing to drive to the closest terminal and take terminal delivery you do not need a lift-gate. Terminal delivery is often a good way to save both lift-gate and residential delivery fees. If none of these options work for you then you will need lift-gate delivery.
How much does lift-gate delivery cost?
The average cost of a lift-gate is . Douglas Equipment ships with several different freight companies depending on the delivery location and the delivery services you request. The best way to find your actual lift-gate cost is to call us for an exact quote of your delivery costs with and without lift-gate delivery
What is Residential Delivery?
Residential delivery is a term and fee used by freight carriers to describe delivery to any address which is not zoned commercial. Usually this is a home, but it could be a church, farm community center, etc. Businesses run from a home are still considered residential. The average residential delivery fee is .
Do I need Residential Delivery?
Often you can avoid residential delivery fees by receiving your shipment at a nearby business or office building. If you have a pickup truck capable of hauling your item, we can schedule "terminal delivery" where the item is delivered to the closest trucking terminal and you receive the item there. This is a good way of saving both residential and lift-gate delivery fees.
What is terminal delivery?
Terminal delivery is where the freight company delivers your shipment to their closest freight terminal (usually in the closest urban area) and you receive the shipment at their terminal.
Why would I use terminal delivery?
By accepting your shipment at the terminal you can save residential and lift-gate delivery fees. You can also save high local delivery fees if you live in a remote or hard to reach area.
How does insurance work with freight shipments?
Every freight shipment is insured. But in order to collect the insurance on damaged goods the receiver MUST INSPECT THE SHIPMENT BEFORE SIGNING FOR IT! Legally, when Douglas Equipment signs the shipment over to the freight company, the freight company owns it. When you receive the item and sign for it, you own it. Therefore it is imperative that you carefully inspect your shipment for any damage.
If there is any damage at all you must note the damage on the freight bill. This is the only way you will be compensated for the damage!!
What should I look for when inspecting my shipment ??
A very small amount of freight shipments arrive damaged, but be sure to inspect your item when it arrives. The most common cause of damage is the fork-lift so pay special attention to holes poked in the packaging and to the bottom 18" of the shipment. Inspect the outside of the packaging to look for dents or crushed corners. If you see anything even slightly suspicious carefully remove all packaging and inspect the item. The driver may be impatient but that beats having to settle for a damaged item. Unlike FedEx or UPS, if you sign your Freight bill free of any claims then you have little recourse if you later discover that it is damaged.
What if my item is damaged?
You have two options. You can note damage on the freight bill and accept the item anyway, or you can refuse the shipment. 99% of freight damage is cosmetic. If you sign the freight bill damaged then the freight company will replace your item, approve reimbursement for parts and repair, or provide compensation depending on the damage to your item. This is often the best option if you need to get your item operational and the damage is cosmetic. If you refuse the shipment it will be returned to us and we will ship a replacement as soon as possible.** This may take some time due to stocking issues and transit times, but this is usually the best option if your shipment is damaged beyond repair. If you accept your shipment in a damaged state it is very important that you call the freight company immediately to schedule an inspection and file the freight claim, you should take good pictures from different angles of the item and the packaging, and you should save all packaging material.
**
If the item is used, there will be no replacement available, so it is vitally important to have the freight company compensate you for repair.
Return Policy:
Returns are at the discretion of Douglas Equipment. If accepted, prior authorization must be obtained to return any equipment. Authorized returns for credit must be prepaid and be received by Douglas Equipment within 10 working days of purchase. Credit will be based on invoice price, less 25% restocking charge, and return freight charges. Refurbishing, if necessary, will be an additional charge to purchaser and will be deducted from any authorized credit.
If free shipping was offered, original and return shipping charges will be deducted from refund amount.
If you order a "Special Order" or "Custom" item, the restocking fee would apply as soon as the order has been placed with the factory.
Taxes:
Due to changing tax requirements, we are required to collect tax in many different states (please contact us to see if your state is taxable). For applicable states any taxes imposed by state governmental authorities on the sale, or use of goods referred to in this auction shall be paid by the buyer, in addition to the purchase price. If items are tax exempt for reasons of: resale, sales of Non-taxable services, Sales to Agricultural Producers, Governmental Entities, or Sales to Persons Presenting a Direct Pay Permit, a signed tax exemption must be filed.
© DEQ Online, 2014