-40%
1 QT Firestone QuickPrime Plus EPDM Liner Seam Primer & Cleaner- Pond and Roof

1 QT Firestone QuickPrime Plus EPDM Liner Seam Primer & Cleaner- Pond and Roof

$ 31.67

Availability: 85 in stock
  • MPN: Does Not Apply
  • Return shipping will be paid by: Seller
  • Brand: Firestone
  • Refund will be given as: Money Back
  • Condition: New
  • Type: Installation Tool
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days

    Description

    FIRESTONE QuickPrime Plus 1 QT
    PLEASE NOTE DUE TO HAZMAT REGULATIONS WE CAN ONLY LIMIT 4 QTs PER PACKAGE
    Discounts for the purchase of multiple units!
    DESCRIPTION:
    Firestone QuickPrime Plus is designed to clean and prime approved Firestone membranes prior to application of QuickSeam

    products where required by Firestone Specialty Products specifications and details. It may also be used to clean membrane prior to the application of Firestone Splice Adhesive (SA-1065).
    Property Minimum Performance
    Base: Synthetic Rubber Polymers
    Color: Translucent Gray
    Solvents: Heptane, Toluene
    Solids: 16 - 18%
    Viscosity: Very thin, free flowing
    Weight: 0.79 kg/L (6.62 lb/gal) (nominal) Specific Gravity: 0.793 (nominal) (H2O = 1)
    Flash Point: -17.8 °C (0.0 °F )
    VOC: Not to exceed 664 g/L (5.55 lb/gal)
    PRECAUTIONARY DATA:
    1. Review Material Safety Data Sheet (MSDS) prior to use.
    2. Flammable. Keep away from fires (open flame) and other possible ignition sources during storage and use. Do not smoke when using.
    3. Red caution labels are required when shipping.
    4. For professional use only.
    5. Use only in well ventilated areas.
    6. Avoid contact with skin. Use of neoprene or nitrile gloves and eye protection with side shield is recommended.
    7. Use only in conjunction with QuickScrubber or QuickScrubber Plus pad and handle. Do not apply with rollers, brushes or rags.
    8. Mix thoroughly before and during use.
    9. Thinning is not allowed.
    10. Keep out of reach of children.
    METHOD OF APPLICATION:
    Surfaces to be primed must be clean, dry, and free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.  Stir QuickPrime Plus thoroughly before and during use.  QuickPrime Plus must be applied with a QuickScrubberor QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow the QuickPrime Plus surfaces to flash off completely according to the touch/push test (usually less than 10 minutes, flash off time will vary depending on ambient air onditions) before applying QuickSeam products or Lap Sealant. Complete QuickSeam product installation or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.
    SHELF LIFE:
    1. Shelf life of one (1) year can be expected if stored in original unopened container at temperatures between 15.6 - 26.7° C (60 - 80° F).
    2. Shelf life will be shortened if exposed to elevated temperatures.
    3. Rotate stock to insure stored material will not go beyond the shelf life of one (1) year.
    STORAGE:
    1. Store in original unopened containers at temperatures between 15.6 - 26.7° C (60 - 80° F) until ready for use.
    2. When exposed to lower temperatures, restore to room temperature prior to use.
    3. Keep the material out of direct sunlight until ready for application.
    COVERAGE RATE:
    Approximately 4.91 - 6.14 m2/L (200 - 250 ft2/gal) one side Note: Application rates may vary based on substrate unevenness and cleanliness of the sheet. Values of 2.45 m2/L (100 ft2/gal) are not uncommon in some membrane application.
    Powered by
    eBay Turbo Lister
    The free listing tool. List your items fast and easy and manage your active items.